Framed panelling had been used in ancient times, as examples found at Herculaneum testify; its reintroduction in the Burgundian Netherlands at the beginning of the 15th century was an improvement that soon spread throughout western Europe. Panelled construction solved the problem of building large surface areas, as on the front of a chest or cupboard, which before this time had been limited by the size of individual planks. These planks, usually hewn with an adz, were heavy and liable to warp and split. Panels could be cut thinner, the main strain being taken by the framework, and the furniture was therefore lighter; moreover, if the panels were not fitted too tightly in their stiles, the wood was less likely to split if it did warp. Now that it was possible to construct larger surface areas, a new range of storage furniture, cupboards and chests in particular, was developed.
Early in the 16th century a new style of bed design appeared; the greater part of the frame was left exposed and was enriched with carving and other decoration, making the frame itself an important part of the design. Favourite carvers' motifs for beds and other types of furniture included strapwork, grotesque masks, and caryatids (draped female figures), bulbous turned pillars and supports, arcading (decorating consisting of arches or arcades), and patterns of scrolled foliage. The heavily turned “cup and cover” motif is frequently found on bedposts in the later 16th century. The cumbersome Gothic trestle tables were replaced by “joyned tables,” with tops fixed to the frames. Draw tables, which could be conveniently lengthened by pulling out the two leaves concealed under the top, were also introduced. Table legs and sides were decorated with carving and inlay, and the cup and cover motif is often found on the legs. Various types of cupboards were made, usually in two stages, or levels. In court cupboards both stages were left open. A simple form of chest of drawers was introduced about 1620.
The legs occasionally imitated those of animals with claw feet or hoofs, but usually they were either turned on the lathe and ornamented with moldings or cut from a flat slab of wood sharply silhouetted and decorated in various ways—with incised designs or with volutes, rosettes, and other patterns in high relief. From about the 6th century BCE, the legs projected above the couch frame; these projections became headboards and footboards, the latter eventually made lower than the headboards. In Hellenistic times headrests and footrests were carved and decorated with bronze medallions carrying busts of children, satyrs, or heads of birds and animals in high relief. Turned legs largely replaced rectangular ones. Although a bronze bed of the 2nd century BCE has been found at Priene and marble couches sometimes occur in tombs, the usual material was wood. The legs often terminated in metal feet and sometimes were encased in bronze moldings, and the rails also were sometimes covered with bronze sheathing.
Any content, trademark/s, or other material that might be found on the Snokey website that is not Snokey’s property remains the copyright of its respective owner/s.pointgreypictures.com
In no way does Snokey claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.