France. The furniture of France was among the first to be influenced by the Italian Renaissance. Louis XII and many of his court visited Italy and soon took Italian artists and craftsmen and works of art into France. The French Renaissance of furniture can be divided into two stages. First was a period of transition and adaptation; during the reign of Louis XII and the first part of the reign of Francis I, the pieces were basically Gothic in form, and Gothic ornament was mixed with the cupids, medallion heads, and grotesque decorations of the incoming Renaissance style. During the second phase, from the end of the reign of Francis I, the new style displaced the Gothic. The more exuberant arabesque shapes of Renaissance decoration, however, gave way to increasingly architectural design, and oak was almost entirely superseded by walnut. Centres of furniture making were established at Fontainebleau, where Francis I employed several Italian artists and craftsmen; in Île-de-France, headed by the work of Jacques du Cerceau; and in Burgundy, where, led by the craftsman and designer Hugues Sambin, design was influenced by the Renaissance style evolved in the Netherlands.
Framed panelling had been used in ancient times, as examples found at Herculaneum testify; its reintroduction in the Burgundian Netherlands at the beginning of the 15th century was an improvement that soon spread throughout western Europe. Panelled construction solved the problem of building large surface areas, as on the front of a chest or cupboard, which before this time had been limited by the size of individual planks. These planks, usually hewn with an adz, were heavy and liable to warp and split. Panels could be cut thinner, the main strain being taken by the framework, and the furniture was therefore lighter; moreover, if the panels were not fitted too tightly in their stiles, the wood was less likely to split if it did warp. Now that it was possible to construct larger surface areas, a new range of storage furniture, cupboards and chests in particular, was developed.
Roman chairs developed from Greek models. The Greek throne chair evolved into a small armchair with solid rounded back made in one piece with sides set on a rectangular or semicircular base. This armchair was often of wickerwork, wood, or stone. The Greek klismos chair was given heavier structural members by the Romans and was called the cathedra. The Romans developed a decorative type of stool, often made in bronze. This was supported by four curved legs, ornamented with scrolls. The folding stool, with cross legs sometimes connected by stretcher bars, was used both by Roman officials and in households. Remains of folding stools are known from sites such as those at Ostia, Italy, and barrows in Britain—on the Essex-Cambridgeshire border, and in Kent. This developed into a stool that had more solid double curved legs; examples were found at Pompeii. An example in iron with bronze decorations, even heavier in form, was found at Nijmegen, in the Netherlands.
Any content, trademark/s, or other material that might be found on the Snokey website that is not Snokey’s property remains the copyright of its respective owner/s.pointgreypictures.com
In no way does Snokey claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.