Roman chairs developed from Greek models. The Greek throne chair evolved into a small armchair with solid rounded back made in one piece with sides set on a rectangular or semicircular base. This armchair was often of wickerwork, wood, or stone. The Greek klismos chair was given heavier structural members by the Romans and was called the cathedra. The Romans developed a decorative type of stool, often made in bronze. This was supported by four curved legs, ornamented with scrolls. The folding stool, with cross legs sometimes connected by stretcher bars, was used both by Roman officials and in households. Remains of folding stools are known from sites such as those at Ostia, Italy, and barrows in Britain—on the Essex-Cambridgeshire border, and in Kent. This developed into a stool that had more solid double curved legs; examples were found at Pompeii. An example in iron with bronze decorations, even heavier in form, was found at Nijmegen, in the Netherlands.
Early in the 16th century a new style of bed design appeared; the greater part of the frame was left exposed and was enriched with carving and other decoration, making the frame itself an important part of the design. Favourite carvers' motifs for beds and other types of furniture included strapwork, grotesque masks, and caryatids (draped female figures), bulbous turned pillars and supports, arcading (decorating consisting of arches or arcades), and patterns of scrolled foliage. The heavily turned “cup and cover” motif is frequently found on bedposts in the later 16th century. The cumbersome Gothic trestle tables were replaced by “joyned tables,” with tops fixed to the frames. Draw tables, which could be conveniently lengthened by pulling out the two leaves concealed under the top, were also introduced. Table legs and sides were decorated with carving and inlay, and the cup and cover motif is often found on the legs. Various types of cupboards were made, usually in two stages, or levels. In court cupboards both stages were left open. A simple form of chest of drawers was introduced about 1620.
The legs occasionally imitated those of animals with claw feet or hoofs, but usually they were either turned on the lathe and ornamented with moldings or cut from a flat slab of wood sharply silhouetted and decorated in various ways—with incised designs or with volutes, rosettes, and other patterns in high relief. From about the 6th century BCE, the legs projected above the couch frame; these projections became headboards and footboards, the latter eventually made lower than the headboards. In Hellenistic times headrests and footrests were carved and decorated with bronze medallions carrying busts of children, satyrs, or heads of birds and animals in high relief. Turned legs largely replaced rectangular ones. Although a bronze bed of the 2nd century BCE has been found at Priene and marble couches sometimes occur in tombs, the usual material was wood. The legs often terminated in metal feet and sometimes were encased in bronze moldings, and the rails also were sometimes covered with bronze sheathing.
Any content, trademark/s, or other material that might be found on the Snokey website that is not Snokey’s property remains the copyright of its respective owner/s.pointgreypictures.com
In no way does Snokey claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.